Hitachi CP-X445 страница 64 Скачать руководство пользователя

Страница: 64 / 84

ENGLISH

Connecting the power supply

WARNING

►Please use extra caution when connecting the power cord as

incorrect or faulty connections may result in ﬁre and/or electrical shock.

• Only use the power cord that came with the projector. If it is damaged, contact

your dealer to newly get correct one.

• Only plug the power cord into an outlet rated for use with the power cord's

speciﬁed voltage range.

• Never modify the power cord. Never attempt to defeat the ground connection of

the three-pronged plug.

Connect the connector of the power cord

to the AC inlet of the projector.

Firmly plug the power cord's plug into

the outlet.

AC inlet

Connector of

the power cord

Connecting the power supply / Operating

Operating

WARNING

►When the power is on, a strong light is emitted. Do not look

into the lens or vents of the projector.

Turning on the power

Set the power switch to the ON position.

Press the STANDBY/ON (projector or

remote control) button.

Displaying

To select an input signal, use the button of INPUT (projector), or the buttons

of RGB, VIDEO or ONE TOUCH (remote control).

To change the aspect ratio, use the button

ASPECT (remote control).

To adjust the zoom and focus, use the

zoom knob and the focus ring.

Turning off the power

Press the STANDBY/ON (projector or remote control) button.

The message "Power off?" will appear on the screen for approximately 5 seconds.

Press the STANDBY/ON (projector or remote control) button again while the

message is visible.

The projector lamp will go off, and the POWER

indicator will begin blinking orange. Then the

POWER indicator will stop blinking and light to

solid orange when the lamp cooling is complete.

Make sure that the power indicator lights to solid orange, set the power switch to

the OFF position. The POWER indicator will go off.

POWER

(Blinking orange)

POWER

(Solid orange)

POWER

(Blinking green) (Solid green)

POWER

(Solid orange)

Zoom knob

Focus ring

Содержание CP-X445





















































































Результаты поиска

Содержание CP-X445

Отзывы:

Похожие инструкции для CP-X445

Бренды по названию

Популярные бренды

Hitachi CP-X445, Руководство пользователя

Результаты поиска

Содержание CP-X445

Отзывы:

Похожие инструкции для CP-X445

Бренды по названию

Популярные бренды