Hitachi CP-X445 страница 11 Скачать руководство пользователя

Страница: 11 / 84

Setting up

Connecting your devices

CAUTION

►Turn off all devices prior to connecting them to the projector.

Attempting to connect a live device to the projector may generate extremely

loud noises or other abnormalities that may result in malfunction and/or damage

to the device and/or projector.

►Use the accessory cable or a designated-type cable for the connection.

Some cables have to be used with core set. A too long cable may cause a

certain picture degradation. Please consult with your dealer for details. For

cables that have a core only at one end, connect the core to the projector.

►Make sure that you connect devices to the correct port. Incorrect connection

may result in malfunction and/or damage to the device and/or projector.

NOTE

• Whenever attempting to connect a laptop computer to the projector, be sure

to activate the laptop’s RGB external image output (set the laptop to CRT display or to

simultaneous LCD and CRT display). For details on how this is done, please refer to the

instruction manual of the corresponding laptop computer.

• Secure the screws on the connectors and tighten.

• Some computers may have multiple display screen modes. Use of some of these

modes will not be possible with this projector.

• For some RGB signal modes, the optional Mac adapter is necessary.

• When the image resolution is changed on a computer, depending on an input,

automatic adjust function may take some time and may not be completed. In this case,

you may not be able to see a check box to select “Yes/No” for the new resolution on

Windows. Then the resolution will go back to the original. It might be recommended to

use other CRT or LCD monitors to change the resolution.

About Plug-and-Play capability

Plug-and-Play is a system composed of the computer, its operating system and

peripheral equipment (i.e. display devices). This projector is compatible with VESA DDC

2B. Plug-and-Play can be achieved by connecting this projector to computers that are

VESA DDC (display data channel) compatible.

• Please take advantage of this function by connecting the accessory RGB cable to the

RGB IN1 port (DDC 2B compatible) and/or the optional DVI cable to the DVI-D port (DDC

2B compatible). Plug-and-Play may not work properly if any other type of connection is

attempted.

• Please use the standard drivers in your computer as this projector is a Plug-and-Play

monitor.

• The CP-X445's DVI is compatible with HDCP (High-bandwidth Digital Content

Protection) and therefore capable of displaying video from HDCP compatible DVD

players, et al. However, if the HDCP standards are modiﬁed, the CP-X455's DVI might

not be able to display video from HDCP compatible device developed in conformance to

such modiﬁed HDCP standards.

Содержание CP-X445





















































































Результаты поиска

Содержание CP-X445

Отзывы:

Похожие инструкции для CP-X445

Бренды по названию

Популярные бренды

Hitachi CP-X445, Руководство пользователя

Результаты поиска

Содержание CP-X445

Отзывы:

Похожие инструкции для CP-X445

Бренды по названию

Популярные бренды