Hitachi CP-X443 series Скачать руководство пользователя

Страница: 22 / 55

Operating the computer screen

CAUTION

►Mistaken use of the mouse/keyboard control could damage

your equipment.

• While using this function, please connect only with a computer.

• Before connecting, read the manuals of the computer you will connect.

NOTE

• It may not be possible to control notebook PC, and other computers with

built-in pointing device (e.g. track ball), using this remote control. In this case, before

connecting go into BIOS (system setup) and select external mouse, and disable the

pointing device. In addition, the mouse may not function if the computer does not have

the needed utility program. See your computer’s hardware manual for details.

• The USB control can be used with Windows 95 OSR 2.1 or higher. It may not be

possible to use the remote control, depending on the computer’s conﬁ gurations and

mouse drivers.

• The USB control can be used only for the functions listed below. You cannot do things

like press two buttons at once (for instance, pressing two buttons at the same time to

move the mouse pointer diagonally).

• This function is not available while the lamp is warming up (the POWER indicator

ﬂ ashes green), and while adjusting the volume and display, correcting for trapezoidal

distortion, zooming in on the screen, using the BLANK function, or displaying the menu

screen.

USB mouse and keyboard control

Connect the projector’s USB port to the computer via the mouse cable.

Available function

Remote control operation

Move pointer

Move using on the disk pad

Left click with mouse

Press the center of the disk pad

Right click with mouse

Press right mouse button

Press keyboard’s

keys

Flip the lever switch up /down ,

press

buttons

Press keyboard’s ENTER key

Press ENTER button

Press keyboard’s PAGE UP key

Press PAGE UP button

Press keyboard’s PAGE DOWN key

Press PAGE DOWN button

Press keyboard’s ESC key

Press ESC button

Operating

Содержание CP-X443 series
























































Результаты поиска

Содержание CP-X443 series

Отзывы:

Похожие инструкции для CP-X443 series

Бренды по названию

Популярные бренды

Hitachi CP-X443 series, Руководство пользователя – Инструкция по эксплуатации

Результаты поиска

Содержание CP-X443 series

Отзывы:

Похожие инструкции для CP-X443 series

Бренды по названию

Популярные бренды