93
4 . Management with Web browser software
• In Standby mode the power indicator will flash green for approx. 3
seconds when at least 1 “Power ON” schedule is saved.
• When the schedule function is used, the power cord must be connected to
the projector and the outlet and the power switch must be turned on, [ | ]. The
schedule function does not work when the power switch is turned off, [O] or
the breaker in a room is tripped. The power indicator will lights orange or green
when the projector gets is receiving the power.
NOTE
Schedule Settings (
75
)
Schedule settings can be configured from a web browser.
Example: If the IP address of the projector is set to 192.168.1.10:
1) Enter
“http://192.168.1.10/”
into the address bar of the web browser.
2) Enter the Administrator ID and password and click
[Logon]
.
3) Click
[Schedule Settings]
on the main menu and select the required schedule
item. For example, if you want to perform the command every Sunday, please
select
[Sunday]
.
4) Click
[Enable]
check box to enable scheduling.
5) Enter the date (month/day) for specific date scheduling.
6) Click
[Apply]
button to save the settings.
7) Click
[Add]
to create new event. After configure the time, command and
parameters, click
[Register]
to add the new event. To return the previous page,
click
[Cancel]
button.
8) Click
[Delete]
button when you want to delete a schedule.
There are three types of scheduling.
1) Daily: Perform the specified operation at a specified time every day.
2) Sunday ~ Saturday: Perform the specified operation at the specified time on a
specified day of the week.
3) Specific Date: Perform the specified operation on the specified date and time.
4.4 Event Scheduling (Continued)
