Hitachi CP-SX635W, Руководство по обслуживанию

Страница: 43 / 102

HITACHI
SM0321
WIRING DIAGRAM 7
#2200
CNBAR
CNBAT
Attaching the ballast
Wiring of the ballast
(1) Wire the igniter lead, and attach to the lamp house.
Pass the cable under the ballast holder along the side of the ballast.
(Make sure not to pinch the cable.)
Ballast
Ballast holder
Wire the igniter lead cables under the
ballast holder making no excessive length.
Bind the cables with clip.
Before you bind the cables, confirm that
the cables are not pinched by ballast holder.
Move the cables around the clip right and left,
the cables around dotted circle will not move
if the cables are pinched.
Wire the igniter leads between the bottom case ribs,
and minimize the lifting.
Otherwise, you will pinch the leads when you attach
the lamp duct.
igniter
lead
<back side of ballast holder>
Pass the igniter leads between the rib1 and the rib2 at the back
of the ballast holder.
Make sure not to cross the cables, and put cables to the rib1 side.
Otherwise, bottom case will pinch the cables.
rib1 rib2
Power
fan