Hitachi CP-SX635W, Руководство по обслуживанию

Страница: 35 / 102

35
CP-SX635(ED3SX40N)
6-13 HIDDEN SERVICE MENU
By the control panel By the remote control transmitter
1. Display the Advanced menu by the
“MENU” button.(If EASY MENU
appears, choose “Go to Advanced
menu” to display ADVANCED MENU.)
2. Select the “OPTION” on the menu.
3. Continue press the button [ ] fi rst,
then press the button [ ] together
with “INPUT”, and hold for 3 seconds.
1. Display the menu by the “MENU”
button. (If EASY MENU appears,
choose “Go to Advanced menu” to
display ADVANCED MENU.)
2. Select the “OPTION” on the menu.
3. Press the “MAGNIFY OFF” button.
Next hold the “MAGNIFY OFF”
button for 3 seconds.
To display the OSD for “HIDDEN SERVICE MENU” set up.
HIDDEN SERVICE
AIR-SENSOR EXECUTE
LAMP ALARM
NONE
STARTUP TYPE 1
BNC TERMINATION TTL
SYNC SLICE LEVEL-1 4
SYNC SLICE LEVEL-2 4
PJLink
TURN OFF
PANEL TIME 1234h
LONG KEY NORMAL
NETWORK RESET
SOFT RESET
6-14 RUN TIME window
AIR - SENSOR
Execute this item to adjust the air sensor.
LAMP ALARM
Select the lamp alarm level. 3 Level ļ 1 Level ļ None
“3 Level” shows three kinds of lamp-messages according to the LAMP TIME count.
“1 Level” shows one kind of lamp-message according to the LAMP TIME count.
“None” shows no lamp-messages. It is the factory default setting.
Set operating time display method (accumulated lamp time display method)
1. Select “ OPTION” from the Advanced menu, then place the cursor on the “LAMP TIME”.
2. Press the [ ], [ENTER] or [RESET] button.
3. Press the [Reset] button once, then press [KEYSTONE] button of the remote control for 3 seconds or more to display
the screen shown below. (The menu will close after 10 seconds if there are no further operations.)
4. Use [ ] or [ ] to select the usage status number. (The usage status is as shown below.)
Usage status number
0 ..... Total usage status
1 ..... Current usage status
2 ..... Usage status before first reset
3 ..... Usage status before second reset
||
9 ..... Usage status before eighth reset
RUN TIME
LAMP Lamp time 1234 h
h
h
h NORMAL Lamp time(Normal) 1000
WHISPER Lamp time(Whisper) 234
AC 2000 AC energizing time
On Number of times on 1
Off Number of times off
No.0 Usage status number(See below)
0
LONG KEY
Select the remote control button operation mode.
NORMAR LONGThe LONG allows to control the pro-
jector with the remote control unit when you hold a
button of it for about 3seconds, and makes MY
BUTTON 1/2 function as LONG KEY DISABLE/LONG
KEY ENABLE compulsorily. If you use these buttons to
control the projector as you assigned with the MY
BUTTON menu, set to the NORMAL.
NETWORK RESET
If this is executed, all of the network setting are initial-
ized.
SOFT RESET
If this is executed, all of the user data is initialized.
Never use it when not required.
STARTUP TYPE
Select the startup screen type. 1 : shows Hitachi Logo
2 : No Hitachi Logo
BNC TERMINATION
Select the RGB2 (BNC) Terminator. 75 ohm ļ TTL
SYNC SLICE LEVEL-1
Set the Sync separation slice level of the RGB1. (1~7)
SYNC SLICE LEVEL-2
Set the Sync separation slice level of the RGB2 (BNC). (1~7)
PJLink
Select the PJLink. Turn off ļ Turn on
PANEL TIME
Use time of LCD panel. Reset the PANEL TIME when-
ever you changed the LCD/LENS prism assembly.