background image

35

Multifunctional Settings (continued)

Multifunctional Settings (continued)

NETWORK Menu

This projector provides the NETWORK function. If you use this
function, please set up the projector according to the Network
environment in which you use it.

memo

If DHCP function on your Network is activated, the following

operation is not normally required, because DHCP function on this projector
is active as initial settings.  Please see the section “Network Setting Up”.

: SELECT

MENU

MAIN
PICTURE-1
PICTURE-2
INPUT
AUTO
SCREEN
OPTION
NETWORK

SETUP
DHCP
INFORMATION
RESET

TURN OFF

Item

Description

SETUP

Press the

(or the ENTER) button, then the IP

ADDRESS menu as right comes up. 

memo

This menu will be shown only when the DHCP

is disabled at the NETWORK menu.
The IP Address is identification number of the projector on the Network.

1. Set the IP Address using the 

buttons. 

memo

The same IP Address with other units cannot be used.

Press the

(or the ENTER) button at the IP

ADDRESS menu, then the SUBNET MASK menu
comes up. The SUBNET MASK is an address of the
Network.

2. Set the address of the Network to be used.
Press the

(or the ENTER) button at the SUBNET

MASK menu, then the DEFAULT GATEWAY menu
comes up. The DEFAULT GATEWAY is the main
device to access outside of the Network.

3. Set the address of the device as gateway to an outer Network.

DHCP

Select the TURN ON or the TURN OFF using the 

buttons. :

TURN ON 

TURN OFF

If your Network doesn’t support the DHCP function, select the TURN OFF.

INFORMATION

Pressing the

(or the ENTER) button displays the

INFORMATION menu. 
The menu shows the information about the current
Network setting as illustrated right.

RESET

Select the EXECUTE using the 

button to reset the NETWORK menu items. :

EXECUTE 

CANCEL

All items on the NETWORK menu are returned to the initial setting.

:RETURN

ESC

ENT :NEXT

NETWORK - SETUP

IP ADDRESS

192 .   168 .     1 .      24

:RETURN

ESC

ENT :NEXT

NETWORK - SETUP

SUBNET MASK

255 .   255 .   255 .      1

:RETURN

ESC

ENT :NEXT

NETWORK - SETUP

DEFAULT GATEWAY

255 .   255 .   255 .      0

NETWORK-INFORMATION

 IP ADDRESS 

192. 168. 1. 24

SUBNETMASK 

255. 255. 255. 0

DEFAULT GATEWAY 

255. 255. 255. 0

MAC ADRRESS 

00. E0. 47. 03. 0C. D8

NETWORK

DHCP

TURN ON

TURN OFF

Содержание CP-SX1350 Series


































































Отзывы: