Hitachi CP-S245 Скачать руководство пользователя

Страница: 1 / 108

Projector

CP-S245/CP-X255

User's Manual – Operating Guide

Thank you for purchasing this projector.

WARNING

►Before using this product, please read the "User's Manual -

Safety Guide" and related manuals to ensure the proper use of this product.

After reading them, store them in a safe place for future reference.

About this manual

Various symbols are used in this manual. The meanings of these symbols are

described below.

WARNING

This symbol indicates information that, if ignored, could possibly

result in personal injury or even death due to incorrect handling.

CAUTION

This symbol indicates information that, if ignored, could possibly

result in personal injury or physical damage due to incorrect

handling.



Please refer to the pages written following this symbol.

NOTE

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in this manual.

• The reproduction, transfer or copy of all or any part of this document is not permitted

without express written consent.

Trademark acknowledgment

• VGA and XGA are registered trademarks of International Business Machines Corporation.

• Apple and Mac are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

All other trademarks are the properties of their respective owners.

Содержание CP-S245













































































































Результаты поиска

Содержание CP-S245

Отзывы:

Похожие инструкции для CP-S245

Бренды по названию

Популярные бренды

Hitachi CP-S245, Руководство пользователя

Результаты поиска

Содержание CP-S245

Отзывы:

Похожие инструкции для CP-S245

Бренды по названию

Популярные бренды