Hitachi CP-S245, Руководство пользователя

Страница: 75 / 108

19
Settings
Date/Time Settings (Continued)
Click the [Apply] button to save the settings.
Item Description
Daylight Savings Time
Click the [ON] check box to enable daylight savings time and
set the following items.
SNTP Server IP Address Configures the SNTP server address in IP format.
Cycle
Configures the interval at which to retrieve Date and Time
information from the SNTP server. (hours:minutes).
Start Configures the date and time daylight savings time begins.
Month Configures the month daylight savings time begins (1~12).
Week
Configures the week of the month daylight savings time
begins (First, 2, 3, 4, Last).
Day
Configures the day of the week daylight savings time begins
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour Configures the hour daylight savings time begins (0 ~ 23).
Minute Configures the minute daylight savings time begins (0 ~ 59).
End Configures the date and time daylight savings time ends.
Month Configures the month daylight savings time ends (1 ~ 12).
Week
Configures the week of the month daylight savings time ends
(First, 2, 3, 4, Last).
Day
Configures the day of the week daylight savings time ends
(Sun, Mon, Tue, Wed, Thu, Fri, Sat).
Hour Configures the hour daylight savings time ends (0 ~ 23).
Minute Configures the minute daylight savings time ends (0 ~ 59).
Time difference
Configures the time difference (hours:minutes).
Set the same time difference as the one set on your PC. If
unsure, consult your network administrator.
SNTP
Click the [ON] check box to retrieve Date and Time
information from the SNTP server and set the following items.
• The new configuration settings are activated after restarting the network connection.
The network connection must be restarted when the configuration settings are changed, The
network connection can be restarted using
[Network Restart]
on the main menu.
• If you connect the projector to an existing network, consult a network
administrator before setting server addresses.
• To enable the SNTP function, the time difference must be set.
• The projector will retrieve DATE and TIME information from the Timeserver
and override time settings when SNTP is enabled.
• The Internal Clock’s time may not remain accurate. Using SNTP is
recommended to maintain accurate time.
NOTE