4
Adjusting The Projector's Elevator
CAUTION
• To prevent damaging the projector and injuring yourself, ALWAYS
HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator
feet.
You can use the elevator feet to adjust the angle of projection. The adjustment range of
the elevator feet is 0 to 9 degrees.
1
Press and hold in the elevator buttons.
2
Raise or lower the projector to the
desired height and then release the
elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
3
As necessary, you can also finely
adjust the height of the projector by
twisting the elevator feet by hand.
Elevator buttons
Elevator feet
Selecting An Input Signal
1
2
Use the zoom ring to adjust the screen
size.
Press the INPUT button.
As illustrated below, each time you press the INPUT
button, the projector switches between its input signal
ports. Select the signal you wish to project.
RGB VIDEO S-VIDEO
COMPONENT VIDEO
AC IN
STANDBY/ON
INPUT
MENU
INPUT button
Zoom ring
Pr
Pr
ojecting The Pictur
ojecting The Pictur
e
e
Focus ring
3
Use the focus ring to focus the picture.