Hitachi CP-C9SM, Руководство по обслуживанию

Страница: 32 / 72

32
CP-S335(C9SM)/CP-X340(C9X)/CP-X345(C9XM)
Wiring diagram 3 (C9SM/C9X/C9XM)
Wiring during bottom case assembly and optical engine assembly
When assembling optical engine (1) Assemble remote control board, and connect CNRM. (2) Wire #3055 (axial flow fan).
Route #3055 lead on the hook of optical engine, being careful that the wire does not sag toward the limit switch.
Secure A83 lead by inserting into bottom case slits. (Wire A83 before installing optical engine.)
When assembling bottom case (1) Install and wire A83 (speaker). (2) Wire CNLC (from limit switch board). Be careful not to pinch wires when installing optical engine.
A83
CNLC
#3055
Secure CNLC and #3055 by inserting into bottom case slit. Insert wires into slit nearer to optical engine. (Wire CNLC before installing optical engine, and be careful of pinching wires when installing the optics engine.)
Connect CNRM first when assembling remote control board.
Insert wire into slit.
Stick a tape not to allow wires to come out from slit.
CNRM
ZTP8
ZTP9
Ta
pe A83 leads after
inserting into slit.
( T
o prevent coming
out from slit. )
ZTP7
ZTP7
remote control board