viii
ENGLISH
Precautions for the monitor
- Use the attached signal-cable when you connect the monitor with PC equipment.
Do not use other signal-cables.
- Confirm the connector is fixed tightly when the signal cable is connected.
Also confirm the screws on the connector are tightened.
- Plug the power cord of the monitor into a different socket from that for other
equipment, such as TV, Radio etc..
- Use a plug with ground terminal and make sure that it connects to the ground.
Precautions for TV & Radio
- Keep the monitor away from TV or Radio.
- Adjust TV or radio antennas in order for the monitor not to receive interference.
- The antenna cable of TV or Radio should be kept away from the monitor.
- Use a coaxial cable for antenna.
You can check if this monitor influences TV/Radio receivers by turning off all other
equipment other than the monitor.
If you can find a problem receiving TV/Radio when using the monitor, check the
instructions mentioned above.
Precaution during transportation
Please pay attention when you transport this monitor because it is heavy.
Furthermore, use the specific carton box and its packaging materials when the monitor is
transported.
FCC (Federal Communications Commission) Statement Warning
WARNING:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is
operated in a commercial environment.This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications.Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
INSTRUCTIONS TO USERS:
This equipment complies with the requirements of FCC
(Federal Communication Commission) equipment's provided that follwing conditions are met.
CAUTION:
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
(1) Power cord : The grounded power supply cord must be used.
(2) Signal cable : The provided signal cable must be used.
SAFETY GUIDELINES(continued)
