9
ENGLISH
When the indicating lamp blinks in green or the message “POWER
SAVE” or “OUT OF FREQUENCY” appears on the screen, there is
something unusual about the status of reception. See “Symptoms
That Seemingly Appear to be Failures.”
*The “standby” mentioned here is different from the “standby” in
Power Saving System
.
OPERATING INSTRUCTIONS
Turning Power On and Off
To turn on the set power supply, set the MAIN POWER switch ( ) of the main unit to ON and
then press the SUB POWER button or the POWER button of the remote control.
To turn off the set power supply, press the SUB POWER button of the main unit or the
POWER button of the remote control, then set the MAIN POWER switch ( ) to OFF.
For normal operations, leave the main power switch ( ) set to ON and use the sub power switch or
the Power button of the remote control to turn the power on and off.
Display lamp
Power status
Off
Off
Lights red
Off
(standby)
*
TIPS
Avoid repeatedly turning the monitor on and off at short time intervals.
Failures might result from such operation.
Turn off the main power switch ( ) before leaving the monitor out of
use for an extended period of time.
If a power failure occurs while the set is running, it would be powered
on upon recovery from the failure. Turn off the unit main power switch
before leaving the set.
POWER
Main power
switch
Set unit
Remote
controller
SUB-POWER
21
Operating
When the main power switch is set
to OFF.
When the main power switch is set
to ON and Power button of the remote
control or the sub power button on the
control panel located at the front part
of the bottom plate is off.
Lights or blinks
green
On
When the main power switch is set
to ON and Power button of the remote
control or the sub power button on the
control panel located at the front part
of the bottom plate is on.
20
