Hitachi CM 4SB2 Скачать руководство пользователя

Страница: 6 / 25

--- 3 ---

(3) The ball bearing at the commutator side is covered with the metal bearing bushing

The resin housing incorporates the metal bearing bushing and the outer frame is covered with the resin tail

cover to cope with weakness of the resin housing that it melts by heat of the ball bearing due to overload

operation. This resin tail cover also prevents the CB cap from being loose by vibration.

(4) Soft-grip handle for comfortable grip and fit

The handle grip is entirely covered with a soft resin material (called "elastomer") for nonskid grip and

comfortable fit. This handle offers less user fatigue even if it is operated for a long time.

(5) Easy to use toolless base adjustment mechanism for secure fixation of the base

The Model CM 4SB2 has the base adjustment mechanism equipped with a lever to adjust the cutting depth

without the aid of tools. In the case of the conventional models and the competitors, a wing bolt is used to fix

the base link. However, there is a problem that such a wing bolt is apt to be loose during operation and lost

without being noticed. In the case of the Model CM 4SB2, the base can be easily fixed and loosened just by

raising and lowering the lever. In addition, the lever is prevented from being loose during operation.

(6) Short distance (L) between the blade tip and the base edge

The Model CM 4SB2 has the uniquely shaped

base unit to shorten the dimension (L) as shown

in the left figure. It is convenient for edge cutting.

The dimension (L) of the Model CM 4SB2 is

28 mm as shown in the table above. It is the

shortest among the current models and C by

10 mm or more.

CM 4SB2

Comparison of the dimension (L)

CM 4SB

CM 4SA2

Back side

Metal bearing bushing

CB cap

Resin tail cover

Содержание CM 4SB2


























Результаты поиска

Содержание CM 4SB2

Отзывы:

Похожие инструкции для CM 4SB2

Бренды по названию

Популярные бренды

Hitachi CM 4SB2, Технические данные и руководство по обслуживанию

Результаты поиска

Содержание CM 4SB2

Отзывы:

Похожие инструкции для CM 4SB2

Бренды по названию

Популярные бренды