Hitachi CL2554AN, Руководство по обслуживанию

Страница: 23 / 72

Service manual CL2554AN / CL2854AN
- 22 -
- simple controlling of volume, bass, treble
Analogue Section
- two selectable analogue pairs of audio baseband input (= two SCART inputs) input level: <2
V RMS,
input impedance: >25 k W
- one selectable analogue mono input (i.e. AM sound): Not used in this chassis
- two high-quality A/D converters, S/N-Ratio: >85 dB
- 20 Hz to 20 kHz bandwidth for SCART-to-SCART copy facilities
- loudspeaker: one pair of four-fold oversampled D/A converters
output level per channel: max. 1.4 VRMS output resistance: max. 5 k W
S/N-ratio: >85 dB at maximum volume max. noise voltage in mute mode: < 10 m V (BW: 20
Hz... 16 kHz)
- one pair of four-fold oversampled D/A converters supplying a pair of SCART-outputs.
output level per channel: max. 2 V RMS, output resistance: max. 0.5 k W ,
S/N-Ratio: >85 dB (20 Hz... 16 kHz)
Application Fields of the MSP 3415D
In the following sections, a brief overview about the two main TV sound standards, NICAM
728 and German FM Stereo, demonstrates the complex requirements of a multistandard audio
IC.
NICAM plus FM/AM-Mono
According to the British, Scandinavian, Spanish, and French TV-standards, high-quality stereo
sound is transmitted digitally. The systems allow two high-quality digital sound channels to be
added to the already existing FM/AM-channel. The sound coding follows the format of the so-
called Near Instantaneous Companding System (NICAM 728). Transmission is performed
using Differential Quadrature Phase Shift Keying (DQPSK. Table below offers an overview of
the modulation parameters.
In the case of NICAM/FM (AM) mode, there are three different audio channels available:
NICAM A, NICAM B, and FM/AM-mono. NICAM A and B may belong either to a stereo or
to a dual language transmission. Information about operation mode and about the quality of the
NICAM signal can be read by the controlling software via the control bus. In the case of low
quality (high bit error rate), the controlling software may decide to switch to the analogue
FM/AM-mono sound. Alternatively, an automatic NICAM-FM/AM switching may be applied.
German 2-Carrier System (DUAL FM System)
Since September 1981, stereo and dual sound programs have been transmitted in Germany
using the 2-carrier system. Sound transmission consists of the already existing first sound
carrier and a second sound carrier additionally containing an identification signal. More details
of this standard are given in Tables below. For D/K very similar system is used.
TV standards
TV
system
Position of sound
carrier (MHz)
Sound modulation Colour system Country
B/G 5.5 / 5.7421875 FM Stereo PAL Germany