Hitachi CL 10D2, Технические данные и руководство по обслуживанию

Страница: 21 / 36

--- 18 ---
Fig. 26
(f) Disassembly of the bracket ass'y
(i) Removal of Bolt (A) [39] (Fig. 25)
Bolt (A) [39] that secures Bracket (A) [42] to Bracket (B) [44] is press-fitted into Bracket (B) [44] and
tightened with the Lock Nut M12 [45]. Hold Bracket (B) [44] with a vise and loosen the Lock Nut M12 [45]
with a wrench (loosening torque: about 350 kg•cm). Supporting around the head of Bolt (A) [39] of
Bracket (A) [42], push the screw side of Bolt (A) [39] with a hand press to separate Bracket (A) [42] from
Bracket (B) [44].
(ii) Removal of Roller (A) [53] (Fig. 26)
The Roller Pin [54] that secures Roller (A) [53] is press-fitted into Bracket (A) [42]. Remove the Roller Pin
[54] by pushing in either direction with a hand press. Then Roller (A) [53] can be removed.
Push with a
large hand
press.
Hold at these positions with a vise and
loosen the Lock Nut M12 [45].
Support
here.
Fig. 25
[39]
[42]
[45]
[44]
[44]
[39]
[42]
[42]
[54]
[53]