Hitachi CJ 110M Скачать руководство пользователя страница 16

Страница: 16 / 32

English

GENERAL POWER TOOL SAFETY WARNINGS

WARNING

Read all safety warnings and all instructions.

Failure to follow the warnings and instructions may result in electric shock,

re and/or serious

injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated (corded) power tool or

battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit.

Cluttered or dark areas invite accidents.

b) Do not operate power tools in explosive atmospheres, such as in the presence

ammable liquids, gases or dust.

Power tools create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power tool.

Distractions can cause you to lose control.

2) Electrical

safety

a) Power tool plugs must match the outlet.

Never modify the plug in any way.

Do not use any adapter plugs with earthed (grounded) power tools.

Unmodi

ed plugs and matching outlets will reduce risk of electric shock.

CONTENTS

GENERAL POWER TOOL SAFETY WARNINGS ........................................16

PRECAUTIONS ON USING JIG SAW ..........................................................18

SYMBOL .......................................................................................................19

SPECIFICATIONS ........................................................................................19

STANDARD ACCESSORIES .......................................................................19

OPTIONAL ACCESSORIES (sold separately)..............................................19

APPLICATIONS ............................................................................................20

PRIOR TO OPERATION ...............................................................................20

CUTTING ......................................................................................................22

CONNECTING WITH CLEANER ..................................................................24

CONCERNING CUTTING OF STAINLESS STEEL PLATES .......................24

SELECTION OF BLADES ............................................................................25

HOUSING THE HEXAGONAL BAR WRENCH ............................................25

MAINTENANCE AND INSPECTION ............................................................25

SERVICE PARTS LIST .................................................................................28

000Book_CJ90VST_ChS.indb 16

2015/7/22 17:23:46

Содержание CJ 110M

































Результаты поиска

Содержание CJ 110M

Отзывы:

Похожие инструкции для CJ 110M

Бренды по названию

Популярные бренды

Hitachi CJ 110M, Инструкция по эксплуатации

Результаты поиска

Содержание CJ 110M

Отзывы:

Похожие инструкции для CJ 110M

Бренды по названию

Популярные бренды