-13-
• Starter pulley ass’y, clutch ass’y, and magneto rotor
[59]
[122]
[121]
[120]
[119]
[118]
[117]
[64]
Starter pulley
6. Starter pulley ass’y, clutch ass’y and magneto rotor
(1) Disassembly
To remove the starter pulley, lightly hit the starter pulley
to turn it counterclockwise while holding the
Magneto Rotor
[122]
. To remove the Clutch
[119]
, loosen the two Step Bolts
[117]
.
To remove the Magneto Rotor
[122]
, remove the Fly Wheel Nut
[121]
, and then use the special
magneto rotor assembly remover to pull out the Magneto Rotor
[122]
.
(2) Reassembly
Before mounting the Magneto Rotor
[122]
in the crank shaft assembly, degrease the engaging sections.
Attach the Clutch
[119]
to the Magneto Rotor
[122]
so that the arrow mark on the side of the Clutch
[119]
can be seen.
CAUTION: To prevent damage to the Piston [51], be sure to remove or mount the starter pulley,
Clutch [119], and Magneto Rotor [122] with the Crank Case FW [59], Crank Case ST
[64] and Cylinder (A) [38] assembled.