28
ON-SCREEN DISPLAY MENU
Ǐ
SETUP MENU
ǐ
Ǐ
Auto Link
ǐ
Use this function to automatically switch on the TV and switch it to
AV1
or
AV5
mode when it detects a video
signal from
INPUT1
or
INPUT5
terminal of the TV. It provides you ease when using with your external
equipment.
Connect external equipment to
INPUT1
or
INPUT5
terminal of the TV. Refer to CONNECTION WITH OTHER
EQUIPMENT on page 50, 51 for more information.
Follow the steps on page 21 to enter the
Setup
menu and select the
Auto Link
option. Enter the
Auto Link
menu
as shown below. Press the
Ÿ ź
cursor buttons to select
AV1
or
AV5.
Then press the
Ż Ź
cursor buttons to set
AV1
or
AV5
to
On, Auto Link
function for the respective inputs will be activated.
(1)To switch on the power connected the signal source of
AV1
or
AV5
while the set is on. When there is an output
from the signal source, the set will switch to
AV1
or
AV5
from the RF or other AV receiving mode automatically.
(2)If the set is in standby mode, turn on the power
connected the signal source of
AV1
or
AV5,
when there is
an output from the signal source, the set will turn on and
switch to
AV1
or
AV5
automatically. The set will turn to
standby mode automatically from the time when there is
no operation on the set for a long time.
Note
˖
˄
1
˅
If the performance of your external equipment
connected to
AV1
and
AV5
on the TV is not reliable, it is recommended to turn off the
Auto Link
function to avoid the misoperation.
˄
2
˅
If you use your external equipment or the videocassette recorder to perform recording after they are set to
On Timer
, do not activate
Auto Link
function to avoid the misoperation.
Ǐ
AV NET
ǐ
Refer to page 35-45.
$XWR/LQN
$9
2Q
$9
2Q
6HOHFW
5HWXUQ
6HW
ź
Ź
