Hitachi C 6DC, Технические данные и руководство по обслуживанию, Страница: 5 / 26

--- 2 ---
4-1. Selling Point Descriptions
(1) 40T TCT saw blade cuts 57 mm (2-1/4") max. at 90 deg.
The Model C 6DC is equipped with a 165 mm (6-1/2") tungsten-carbide tipped saw blade as a standard
attachment. Its maximum cutting depth is 57 mm (2-1/4"), while maker C's maximum cutting depth is 54 mm
(2-1/8").
(2) 40T TCT saw blade cuts 40 mm (1-9/16") max. at 45 deg.
(Suitable for cutting 2 x 4 materials)
The Model C 6DC's maximum cutting depth is 40 mm (1-9/16") at 45 degrees inclined cutting. Therefore, a
2 x 4 workpiece can be easily cut at 45 degrees inclined cutting.
(3) Well-balanced and comfortable-to-grip switch handle
The shape of the handle is an important consideration in designing an easy-to-use circular saw. The shape,
angle and location of the Model C 6DC's switch handle is similar to those of AC-powered circular saws that are
familiar to users, because of Hitachi's unique design of the battery holder. The figures and the table below
give a comparison of switch handles between the Model C 6DC and maker C's saw.
Cutting depth: maximum Cutting depth: 15 mm (5/8")
C 6DC
C (dotted line)
C: 15
C 6DC: 32.5
(AC-powered circular saw: 35.5
)
15 mm (5/8")
Sectional view of handle
34 mm (1-11/32")
32 mm
(1-1/4")
C
C 6DC
37 mm
(1-15/32")
56 mm
(2-7/32")
Grip of handle
Pressing-down
operation
C 6DC
The handle is comfortable because of the
small-diameter grip.
The handle is highly raised (32.5 ), so it can
be pressed down easily.
C
The handle is not comfortable because of the
large-diameter grip.
The handle is not highly raised (15 ), so it
cannot be pressed down easily (especially
when cutting at a shallow depth).