Hitachi C 6DC, Технические данные и руководство по обслуживанию, Страница: 11 / 26

--- 8 ---
CAUTION
For safe operation, see
instruction manual. Use HITACHI
charger UC 24YF for recharging.
CAUTION
Read thoroughly
HANDLING INSTRUCTIONS before
use.
Do not disassemble nor
throw into fire.
CAUTION
Read thoroughly HANDLING INSTRUCTIONS before use.
DANGER ---
Keep hands and body parts away from blade.
Contact with blade will result in serious injury.
WARNING ---
To reduce the risk of injury, user must read
and understand instruction manual, Check lower guard.
It must close instantly! Hold saw with both hands.
Support and clamp work. Wear eye protection.
(9) Do not attempt to disassemble the storage battery or the charger.
Special devices, such as a thermostat, are built into the storage battery and charger to permit rapid charging.
Incorrect parts replacement and/or wiring will cause malfunctions which could result in fire or other hazard.
Instruct the customer to bring these units to an authorized service center in the event repair or replacement is
necessary.
(10) Disposal of the Model EB 18B battery.
Ensure that all customers understand that Model EB 18B Batteries should be turned in to a Hitachi Power
Tool sales outlet or authorized service center when they are no longer capable of being recharged or
repaired. If thrown into a fire, the batteries may explode, or if discarded indiscriminately, leakage of the
cadmium compound contained in the battery may cause environmental pollution.
8-2. Caution Plates
(1) The following basic safety precautions are listed on the Name Plate attached to the main body of each tool.
For Australia and New Zealand
(2) The following cautions are listed on the Name Plate attached to each Model EB 18B Battery.
For Europe For the U.S.A and Canada
For the U.S.A. and Canada
DANGER ---
N'approchez ni les mains ni aucune autre partie
du corps de la lame. Tout contact avec la lame risque de
provoquer de graves blessures.
AVERTISSEMENT ---
Afin de réduire le risque de blessure,
I'utilisateur doit lire et bien comprendre le mode d'emploi.
Vérifiesz le protecteur inférieur: il doit se refermer instantanément!
Tenez la scie avec les deux mains. Soutenez et immobilisez le
matériau à scier. Portez des Iunettes ou une visière.