44
Tub Clean program
筒清洗
Set to Auto Self Clean
⥑હᣅ⎊Ւᾉᛤᘺ
Programs that cannot be configured
ᤀᘍ⥑હ᱿Ễ
We recommend setting to "Auto Self Clean" to clean stains that you cannot see and ensure high performance.
⩀আ⥑હᣅȵ⎊ՒᾉᛤᘺȶŊ˫͵૽ᘺ⠥ᐥʑ᳖ʃ⣲᱿ᖸឬᛤᘺʯᛍŊ⩕ᘺ⠥ሩ⎧⳺ȯ
If would be even better if this is used along with the "Tub Clean" program.
ॖኞ⎞ȵᾉᛤᘺȶỄɺ⬚͐ᮢŊᘺ⠥⳧Ễሳሩ⎧⳺ȯƺ
(P.53)
"Blanket", "Gentle", "Delicate", "Tub Clean", "Tub Dry" programs, as well as "Air Jet" operations
ȵ⡕ᕧȶȮȵُȶȮȵ↹ಀ⠥ȶȮȵᾉᛤᘺȶȮȵᾉㆺʯȶỄȮȵㆺʯȶỄ
Factory setting: "not set". If you need to change the settings
ӛೇ⥑હᣅȵᤀ⥑હȶȯॖトሩᄊ⥑હ
Ȣ
After the machine is set to "Auto Self Clean", the tub will be cleaned during the spin cycle, which is why an additional 9L
of water will be used.
The duration of operation will also be extended by 5 minutes.
⥑હᣅȵ⎊ՒᾉᛤᘺȶരŊሳ߱⌉ᖛ⠗Ễʑᛤᘺᘺ⠥ᐥŊߌᔍᮢᖛ̤ሳ࣑Խ₎
9L
ȯᘺ⠥ᆹ⿵ʬሳೖ₎
5
Ӡ⾝ȯ
Ȣ
After the start button is pressed, the settings will be saved.
ྈʁ
ం
Ւྈ⸹രŊ૽Ѳએ⥑હȯ
Ȣ
When the settings are manually set to "spin only", "spin for 1 minute", or "do not spin", the "Auto Self Clean" will
automatically be canceled (the light will turn off).
༆Ւ⥑હᣅȵХ⌉ᖛȶȮȵ⌉ᖛ
1
Ӡȶȵʃ⌉ᖛȶᆹŊȵ⎊Ւᾉᛤᘺȶሳ⎊Ւ⤟ぜ(᤹ᥨ)ȯ
2
3
Then, press to select a program
ᤋരྈȭȭȭⴆႹỄ
Press
ྈʁ
Press (Operation will commence and end automatically)
ྈʁ (আᘺ⠥Ŋ⎊Ւታ)
The light will turn on
ˌᥨ
The light will turn off
᤹ᥨ
Set
ሷ⥑હ
A "beep beep" sound will
be played as a notification.
ᱹӛȵܶܶȶ⊖بᵧȯ
A beep sound will be
played as a notification.
ᱹӛȵܶȶ⊖بᵧȯ
Not set (factory setting)
ᤀ⥑હ(ӛೇᆹ)
4
1
Press to power on the machine
ྈʁ Ŋⳇヅ
ȭ
A configuration complete indication
will be displayed and the user will be
notified via a sound.
ㆴḻ⥑હરໞŊʏ˫⊖ㅠبᵧȯ