66
Troubleshooting (Continue)
Problem
Possible Cause
Solution
Unusual noise or
vibration
●
The transport bolts may not have been
removed.
●
The washer dryer may be installed on
a sloping or unstable surface.
●
There may be foreign objects inside
the drum.
●
Remove the transport bolts
before using.
●
Install the washer dryer on a
horizontal, stable surface.
●
Remove foreign objects such as
coins, pins, etc. from the drum.
Noise during drain
cycle
●
This is normal. There may be noise
when the drain pump is on.
●
This is not a malfunction.
There’s the sound
of water when the
drum is rotated
manually.
●
The sound of water
fl
owing when
the drum is turned by hand when the
machine is not running. This is the
sound of the water in the balance ring,
which is used to balanced.
●
This is not a malfunction.
Tapping noise
comes out at spin
start.
●
This is normal. Tapping sound is
generated when laundry touches to the
laundry protection bulge on the laundry
inlet.
●
This is not a malfunction.
Dispenser is wet.
●
In some environmental or usage
conditions, Dispenser may get wet due
to condensation.
●
This is not a malfunction.
Water remains in
washer dryer before
initial use.
●
There may be drops of water or
condensation in the washer dryer
due to the factory inspection prior to
shipment.
●
This is not a malfunction.
Unusual sounds
occur during drying
operations.
●
The fan rotation speed is adjusted
during drying operations, causing the
sound to
fl
uctuate.
●
This is not a malfunction.
The drain outlet
makes a noise
during drying
operations.
●
This is the sound of moist air being
expelled during drying operations.
●
This is not a malfunction.
The noise increases
after the operation
fi
nishes.
●
This is the sound of the machine
checking whether the fan is operating.
●
This is not a malfunction.
Содержание BD-D100GV
Страница 71: ...71 Memo ...
Страница 72: ...3WPL147361 ...
