Hitachi AX-M84, Инструкция по эксплуатации

Страница: 9 / 22

UK-8
CLOCK SETTING(on the Remote Control)
Note: 1. You can set the clock by following the 2 methods below when the main unit is under standby
mode or is turned on.
2. Each enable state as shown above will be cleared, if the button is not. press in 5 seconds.
A. Select the CLOCK button on the remote control to set the current time only.
1. Press and hold the CLOCK button once until the hour digit will flash on the display.(F1)
2. Press the or button to adjust the correct hour digit.
3. Press and hold the
CLOCK button again until the minute digit will flash on the display.(F2)
4. Press the or button to adjust the correct minute digit.
5. Press the
CLOCK button once more to confirm the current time. (F3)
B. Select the MENU button on the unit (or remote control) to set the current time.
1. Press the MENU button, until the CLOCK will show on the display.
2. Press the button once until the hour digit will flash on the display.(F1)
3. Press the or button to adjust the correct hour digit.
4. Press the button again until the minute digit will flash on the display.(F2)
5. Press the or button to adjust the correct minute digit.
6. Press the button once to confirm the current time. (F3)
MENU OPERATIONS
CLOCK
TIMER EQ ID3
FLAT
BROWSE
ON
RECORD
Press “ ”
ON / OFF
ID3 ON
ID3 ON / OFF
REC CARD
REC
CARD / USB
ON TIMER OFF TIMER
ROCK CLASSIC JAZZ POP
PRE 01 PRE 02 PRE 20
SOURCE VOLUME
MENU
Note: “UP/DN” is “ or ”
"P" is “ ”.
Press “ ”
Press“ ”
to confirm
To set hour
To set min
To set hour
To set min
To set hour
To set min
Press “ ” Press “ ”
Press “ ” Press “ ”
Press “ ”
Press “ ”
Press “P” to
confirm
PRESET DISC USB CARD TUNER
F1
F2
F3
Press or button
Press “ ”
Press“ ”
to confirm Press“ ”
to confirm
Press or button
Press or button
Press“ ”
to confirm Press“ ”
to confirm
Press or button
Press or button Press “ ”
Press or button
Press or button
Press or button