43
Using the Preset for Washing
預校時間洗衣
Put the laundry in and press the "POWER
SWITCH" button
.
放入衣物，按下電源開關按鈕
。
Press the "PROGRAM" button
, select the
washing mode.
按下『程序』按鈕
，選擇洗衣方式。
•
With each pressing on the
“
PROGRAM
”
button, the
indicator will light or flash in sequence.
每按動一次『程序』按鈕，各指示燈會順次點亮或閃
動。
Press the "PRESET" button
, set the
predefined time.
按下『預校』按鈕
，設定預定時間。
•
Set the time it will take to finish washing from now.
設定從現在開始多長時間後結束洗衣。
•
Predefined time can be switched by pressing the
"PRESET" button.
按下『預校』按鈕，可切換預定時間。
Press "START" button
.
按下『
動』按鈕
★
Put in the detergent according to the amount and
close the lid.
(The sound of buzzer indicates washing
completion)
根據顯示的水位，
放入洗衣粉，關閉機蓋
（蜂鳴聲響起表示洗衣完畢）
•
The pulsator to detect the amount of laundry and
display on the control panel.
19
攪拌翼旋轉檢測出洗衣量並由控制面板顯示出來。
19
•
If powder synthetic detergent is used, be sure to put
detergent into detergent dispenser.
使用粉末合成洗衣粉時，請將洗衣粉加入洗衣粉加入
盤。
•
Do not use liquid detergent during preset washing.
預校洗衣時，請勿使用液體洗衣劑。
※
Predefined operation can't be set in "SILK", "BLANKET", "BASKET CLEAN" and "AIR-JET" processes.
『絲絨』、『被毯』、『筒清洗』、『風乾』程序不能設定預校運轉。
