Hitachi A1DN Скачать руководство пользователя страница 30

Страница: 30 / 114

CP-A100 / ED-A100 / ED-A110 (A1DN)

NOTE

• Please reset the lamp time only when you have replaced the lamp, for a suitable indication about the lamp.

Replacing the Lamp

A lamp has a ﬁ nite product life. Using the lamp for long periods of time could cause the picture

darke

the color tone

poor. Note that each lamp has a different lifetime, and some may burst or burn out soon after

being started using.

CAUTION

Do not touch any inner space of the projector, while the lamp is taken out.

2. Loosen the screw (marked by arrow) of the lamp cover and then slide the

lamp cover to the side to remove it.

3. Loosen the 2 screws (marked by arrows) of the lamp and slowly pick up the

lamp by the handles.

4. Insert the new lamp, with cautions not to touch the inside of the lamp house.

When inserting, pay attention to the socket position ﬁrst and to the pins for
positioning next.

5. Tighten ﬁ rmly the 2 screws of the lamp that are loosened in the previous

process to lock it in place.

6. Slide the lamp cover into place and ﬁ rmly tighten the screw of the lamp

cover.

7. Plug in and restart the projector.

Then, reset the lamp time (which is the time counter for the lamp use).

(1) Press the

button on the projector or the

MENU

button on the

remote control. The “

EASY MENU

” appears.

(2) Point at the “

Go to Advanced Menu …

” in the menu using the

button, then press the

button. “

” appears.

(3) Pointed at the “

OPTION

” in the left column using the

button,

then press the

button. The cursor moves to the right column.

(4) Pointed at the “

LAMP TIME

” using the

button, then press the

button. A dialog appears.

(5) Press the

button to select the “

RESET

” on the dialog. It performs

resetting the lamp time.

1. Turn the projector off and unplug the power cord from the power outlet.

ool the projector down by leaving it for about 45 minutes

where

it is.

Lamp house
(inside of the
lamp cover)

Lamp cover

Screw

Pin for
positioning

Socket

Screw

Pin for positioning

Содержание A1DN



















































































































Результаты поиска

Содержание A1DN

Отзывы:

Бренды по названию

Популярные бренды

Hitachi A1DN, Руководство по обслуживанию

Результаты поиска

Содержание A1DN

Отзывы:

Бренды по названию

Популярные бренды