Hitachi 42HDT52, Руководство по эксплуатации, Страница: 51 / 104

Screen 10:
The TV Guide On Screen system will test the code
of your Cable box. No TV, Cable or remote buttons
should be pressed while performing the automatic
test. After the testing process is complete, the
setup procedure will continue, see screen 11.
Screen 11:
If the Cable box tuned itself to channel 28 after the
code testing, highlight YES, then press the SELECT
button to continue. highlight NO, then press the
SELECT button to test a different code. Highlight
TEST THIS CODE AGAIN and then press the
SELECT button to try and test the same code
again.
Screen 12:
Do you have an antenna connected? Use the
CURSOR PAD
and to highlight your choice,
then press the SELECT button to continue.
NOTE: In order to receive the program listings, you
must select YESin this screen if you chose
NO in Screen 3.
Screen 13:
Please confirm your initial settings. If your settings
are OK, highlight YES, FINISH SETUP PROCESS,
then press the SELECT button to continue.
highlight NO, REPEAT SETUP PROCESS, then
press the select BUTTON to redo the setup.
Screen 14:
The Basic TV Guide On Screen system setup has
just been completed. Press the SELECT button to
continue.
Screen 15:
Would like the TV Guide On-Screen system to
control the recording of your VCR?
Use the CURSOR PAD
and to highlight your
choice, then press the SELECT button to continue.
If YES: Please see Screen 16.
If NO: Please see Screen 21.
51
TV Guide On Screen
On-Scr
een Display