English
- 10 -
First Time Installation (depending on the model)
Note:
,
f
\
ou are going to perform F
5
A
16
A
7
installation
insert
the F
5
A
16
A
7
card (optional) into the
&
onditional Access
terminal of
\
our
79
before switching on
\
our
79
.
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press
OK
.
On the next screen, set your preferences using the
directional buttons.
Note:
Depending on the
Country
selection
\
ou ma
\
be as
N
ed
to set and con
¿
rm a P
,1
at this point.
7
he selected P
,1
cannot
be
. You have to enter it if
\
ou are as
N
ed to enter a P
,1
for an
\
menu operation later.
About Selecting Broadcast Type
Digital Aerial:
If
Digital Aerial
broadcast search
option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings are
completed.
Digital Cable:
If
Digital Cable
broadcast search
option is turned on, the TV will search for digital cable
broadcasts after other initial settings are completed.
According to your other preferences a con
¿
rmation
message may be displayed before starting to search.
Select
YES
and press
OK
to proceed. To cancel
operation, select
NO
and press
OK
. You can select
Network
or set values such as
Frequency
,
Network
ID
and
Search Step
. When
¿
nished, press
OK
button.
Note:
Searching duration will change depending on the
selected
Search Step
.
Satellite (depending on model):
If
Satellite
broadcast search option is turned on, the TV will
search for digital satellite broadcasts after other initial
settings are completed. Before satellite search is
performed some settings should be made. Before the
satellite search starts, a menu will be displayed where
you can select to start a
Fransat
installation. Set the
Install Type
as
Operator
and than set the
Satellite
Operator
as the related Fransat operator. Then press
the
OK
button to start
Fransat
installation. You can
select to start an automatic or manual installation.
Press
OK
to proceed. Fransat Installation will be
performed and broadcasts will be stored (if available).
If you set the
Install Type
as
Standard
, you can
continue with regular satellite installation and watch
satellite channels.
You can start a Fransat installation at any time later
from the
Installation>Automatic channel scan>
Satellite
menu.
There are three types of antenna selection.
Antenna
Type
menu will be displayed
¿
rst. You can select
Antenna Type
as
Direct
,
Single Satellite Cable
or
DiSEqC switch
by using “ ” or “ ” buttons.
Direct:
If you have a single receiver and a direct
satellite dish, select this antenna type. Press
OK
to
continue. Select an available satellite on the next
screen and press
OK
to scan for services.
Single Satellite Cable:
If you have multiple
receivers and a single satellite cable system, select
this antenna type. Press
OK
to continue. Con
¿
gure
settings by following instructions on the next screen.
Press
OK
to scan for services.
DiSEqC switch:
If you have multiple satellite
dishes and a
DiSEqC switch
, select this antenna
type. Then set the DiSEqC version and press
OK
to continue. You can set up to four satellites (if
available) for version v1.0 and sixteen satellites for
version v1.1 on the next screen. Press
OK
button
to scan the
¿
rst satellite in the list.
Analogue:
If
Analogue
broadcast search option is
turned on, the TV will search for analogue broadcasts
after other initial settings are completed.
Additionally you can set a broadcast type as your
favourite one. Priority will be given to the selected
broadcast type during the search process and the
channels of it will be listed on the top of the
Channel
List
. When
¿
nished, press
OK
to continue.
A dialogue screen asking to activate parental control
will be displayed. If you select
Yes
, parental restriction
options will be displayed. Con
¿
gure as desired and
press
OK
when
¿
nished. Select
No
and press
OK
to advance, if you don’t want to activate parental
restrictions.
You can activate
Store Mode
option at this point.
This option will con
¿
gure your TV’s settings for store
environment and depending on the TV model being
used, the supported features of it may be displayed
on the top of the screen as an info banner. This option
is intended only for store use. It is recommended to
select
Home Mode
for home use. This option will be
available in
System>Settings>More
menu and can
be turned off/on later.
Depending on the model of your TV and the country
selection
Privacy Settings
menu may appear at
this point. Using this menu you can set your privacy
privileges. Highlight a feature and use Left and Right
directional buttons to enable or disable. Read the
related explanations displayed on the screen for
each highlighted feature before making any changes.
You can use
Pro/-
buttons to scroll up
and down to read the entire text. You will be able to
change your preferences at any time later from the
Settings>Privacy Settings
menu. If the
Internet
Connection
option is disabled
Network/Internet
Settings
screen will be skipped and not displayed.
Press
OK
button on the remote control to continue
and the
Network/Internet Settings
menu will be
displayed, if you con
¿
rm the previously displayed
message asking whether you want to do the network
settings. Please refer to
Connectivity
section to
con
¿
gure a wired or a wireless connection. After the
English
- 11 -
settings are completed press
OK
button to continue.
To skip to the next step without doing anything select
No
and press the
OK
button when the message is
displayed asking whether you want to do the network
settings.
After the initial settings are completed TV will start
to search for available broadcasts of the selected
broadcast types.
After all the available stations are stored, scan results
will be displayed. Press
OK
to continue. The
Edit
Channel List
menu will be displayed next. You can
edit the channel list according to your preferences or
press the
Menu
button to quit and watch TV.
While the search continues a message may appear,
asking whether you want to sort channels according
to the LCN
(*)
. Select
Yes
and press
OK
to con
¿
rm
.
(*)
/&1
is the
/
ogical
&
hannel
1
umber s
\
stem that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
Note:
Do not turn off the
79
while initializing
¿
rst
time installation.
1
ote that
some options ma
\
not be
available depending on the countr
\
selection.
Using SatcoDX Feature (depending on the model)
You can perform SatcoD
;
operations using the
Installation>Satellite Settings
menu. In the
SatcoDX
menu, there are two options regarding to
the SatcoD
;
.
You can download or upload SatcoD
;
data. In order
to perform these functions a USB device must be
connected to the TV.
You can upload current services and related satellites
& transponders in TV, to a USB device.
Additionally you can download one of the SatcoD
;
¿
les stored in USB device, to the TV.
When you select one of these
¿
les, all services and
related satellites and transponders in the selected
¿
le will be stored in the TV. If there are any installed
terrestrial, cable and/or analog services, they will be
kept and only satellite services will be removed.
Afterwards, check your antenna settings and make
changes if necessary. An error message stating “
No
Signal
” may be displayed if the antenna settings are
not con
¿
gured properly.
Media Playback via USB Input
You can connect
.
´
and 3.
´
inch (hdd with e
[
ternal
power suppl
\
) e
[
ternal hard dis
N
drives or
8
S
%
memor
\
stic
N
to
\
our
79
b
\
using the
8
S
%
inputs
of the
79
.
IMPORTANT!
Back up the
¿
les on your storage devices
before connecting them to the TV. Manufacturer will
not be responsible for any
¿
le damage or data loss.
Certain types of USB devices (e.g. MP3 Players)
or USB hard disk drives/memory sticks may not be
compatible with this TV. The TV supports FAT32
and NTFS disk formatting but
recording will not be
available with NTFS formatted disks.
While formatting USB hard drives which have
more than 1TB (Tera Byte) storage space you may
experience some problems in the formatting process.
Wait a little while before each plugging and unplugging
as the player may still be reading
¿
les. Failure to do
so may cause physical damage to the USB player
and the USB device itself. Do not pull out your drive
while playing a
¿
le.
You can use USB hubs with your TV’s USB inputs.
External power supplied USB hubs are recommended
in such a case.
It is recommended to use the TV’s USB input(s)
directly, if you are going to connect a USB hard disk.
Note
:
hen viewing image
¿
les the
0
edia
%
rowser
menu can onl
\
displa
\
image
¿
les stored on the
connected
8
S
%
device.
Timeshift Recording(depending on the model)
Press
Pause
button while watching a broadcast to
activate timeshifting mode. In timeshifting mode, the
programme is paused and simultaneously recorded
to the connected USB disk.
Press
Play
button again to resume the paused
programme from where you stopped. Press the
Stop
button to stop timeshift recording and return to the live
broadcast.
Timeshift cannot be used while in radio mode.
You cannot use the timeshift fast reverse feature
before advancing the playback with the fast forward
option.
Instant Recording(depending on the model)
Press
Record
button to start recording an event instantly
while watching a programme. You can press
Record
button on the remote control again to record the next
event on the EPG. In this case, an OSD will be displayed,
indicating the programmed events for recording. Press
Stop
button to cancel instant recording.
You can not switch broadcasts or view the media
browser during the recording mode. While recording
a programme or during the timeshifting, a warning
message appears on the screen if your USB device
speed is not suf
¿
cient.
Содержание 24HE2100
Страница 1: ......
