Installation Instructions
The monitor can be used with any IBM personal computer or compatible
equipped with display cards capable of any of the following modes: VGA,
super VGA, 8514/A, non-interlaced 1024 x 768, and 1280 x 1024 modes.
Proceed to install the monitor as follows:
1. Turn off the power to the monitor, the computer system, and other
attached devices.
2. If the display adapter is not yet installed in the computer system, install
it according to the instructions accompanying the display card.
3. Connect the video cable on the monitor to the
output of the
display adapter and tighten the fastening screws.
adapter
Fig. 5. Rearpanel connectors.
