Hitachi 15LD2550B, Инструкция по эксплуатации

Страница: 22 / 38

English - 17 -
In both manual and auto search, any existing
channel in the database is not re-stored to avoid
redundant duplicates of that channel.
First Time Installation
The user can use this item to load default
settings, which were loaded to the receiver at
the factory.
To install factory settings, highlight
“First Time
Installation” menu and press the OK button.
,QVWDOODWLRQ
$GG1HZ&KDQQHOV
)LUVW7LPH,QVWDOODWLRQ
Then you will be asked to confirm for deleting
all channels and settings:
<HV
<RXUSUHYLRXVGLJLWDOFKDQQHOOLVWZLOOEHGHVWUR\HG
$UH\RXVXUH\RXZDQWWRGHOHWHDOOGLJLWDOFKDQQHOV
DQGVHWWLQJVIRUILUVWWLPHLQVWDOODWLRQ"
1R
By selecting Yes and pressing the OK button,
the existing channel table will be deleted.
After factory settings are loaded, “
First Time
Installation ” menu will be displayed:
3OHDVHHQVXUHDHULDOLVSOXJJHGLQ'R\RX
ZDQWWRVWDUWILUVWWLPHLQVWDOODWLRQ"
<HV 1R
Press the OK button to start installation. After
search is completed for digital channels, a
message asking whether to search for
analogue channels appears on the screen:
<HV
'R\RXZDQWWRVHDUFKIRU
DQDORJXHFKDQQHOV"
1R
Press the OK button to search for analogue
channels.The following menu appears on the
screen for analogue channel
search:
7[WUHJLRQ:HVW(XURSH
Select your Language , Country and Txt. region
by using or and
_
/
`
buttons. Press OK
button to continue. To cancel, press TV button.
The following menu will be displayed during the
APS process:
After APS is finalized, the programme table will
appear on the screen. In the programme table
you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them in
the program table.
Configuration
Press the MENU button to display the main menu
and press the button twice to highlight
Configuration. Then press the
OK button to
ENG-1538-1055 UK-17MB21 UK IDTV-(WO SVHS-WO PC)-10051059-50109282-rev1.p65 20.07.2007, 09:39 17