Hitachi 15LD2550B, Инструкция по эксплуатации

Страница: 5 / 38

Once the TV has found all your local stations, they are then automatically
assigned a programme numberand name, if available from the broadcast.
important note before starting Auto Setup
important note.
start A.P.S. (Auto Programming System)
If you have a Video Cassette Recorder or a Satellite receiver connected to your TV please
ensure that they are switched on before automatic tuning begins. In the case of a VCR, insert
a pre-recorded tape and begin playback of your equipment. These measures ensure that all
your external equipment is tuned in during the Auto Setup procedure.
3
5
After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assigned to
the programmes.
4
After Automatic Search process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and Txt. region by using / button and
then press the RED or OK button
|
}
For details, please refer to the Install Menu section of the instruction book.
When the TV is turned on for the first time, it is in the digital mode.
Because this is the first time the TV is used, there are no channels stored
in the memory and the following message appears on the screen.
To start installation process, select “Yes”, to cancel select “No”. This process
will take about five minutes. To cancel searching, you can press “ M (MENU) ”
button at any time during the process.
1
2
Txt. region West Europe
Please ensure aerial is plugged in. Do you
want to start first time installation?
Yes No
MENU
BBC ONE
BBC TWO
BBC CHOICE
Searching UHF channels 30. Please wait. This will take a few minutes
Cancel search
AUTOMATIC SEARCH
Channels:
12 %
〱ⵑ升ⵈ䥔䅃䡉ⵅ乇⴨ㄵ䱄㈵㔰䈩ⵍ䈲㈭啋䥄呖ⴱ㔳㠭⠱〵㔠啋⤭㄰〵㄰㔹ⴵ〱ㅘ塘
㈵⁔敭浵稠㈰〷⃇慲﹡浢愠〸㨵㠺㌸