9
English
6. Adjusting the base and saw blade to maintain
perpendicularity (only aluminum base type)
The angle between the base and the saw blade
has been adjusted to 90°, however should this
perpendicularity be lost for some reason, adjust
in the following manner:
(1) Turn the base face up (
Fig. 7
) and loosen the
wing-bolt (
Fig. 3
).
(2) Apply a square to the base and the saw blade
and turning the slotted set screw with a slotted-
head screwdriver, shift the position of the base
to produce the desired right angle.
7. Service parts list
CAUTION
Repair,
modifi cation and inspection of Hitachi Power
Tools must be carried out by a Hitachi Authorized
Service Center.
This Parts List will be helpful if presented with
the tool to the Hitachi Authorized Service Center
when requesting repair or other maintenance.
In the operation and maintenance of power tools,
the safety regulations and standards prescribed in
each country must be observed.
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modifi ed to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without
prior notice.
NOTE
Due to HITACHI’s continuing program of research and
development, the specifi cations herein are subject to
change without prior notice.
00̲C6SS̲C99180031̲901.indb 9
00̲C6SS̲C99180031̲901.indb 9
2012/02/29 16:11:21
2012/02/29 16:11:21
