Hisun Motors HS5D-EV, Руководство пользователя

Страница: 67 / 76

67
MAINTENANCE
Tires
WARNING
Operating your vehicle with worn tires, improperly inflated tires, non-standard tires or improperly
installed tires will affect vehicle handling and could cause an accident resulting in serious injury or
death. Always follow all tire maintenance procedures as
outlined in this manual and on the labels on the vehicle.
Always use
HSUN -approved size and type of tires for this
vehicle when replacing tires.
Tire Tread Depth
Always replace the tires when the tread depth is worn
to minimum allowable.
① 3mm(0.12in)
Checking tire inflation pressure
Though the tire pressure is factory-set to the prescribed level, it naturally drops slowly in the course of
time, thus check it every day and inflate as necessary.
tire sizes inflation pressure
Front: 26x9-14 138kPa (1.4kgf/cm2, 20psi)
Rear: 26x11-14 138kPa (1.4kgf/cm2, 20psi)
Inspect the following items occasionally for tightness, and if they've been loosened for
maintenance service. Do not lubricate the stud or the lug nut.
Wheel Removal
1. Apply the brakes. Set the park brake. Turn the key off.
2. Loosen the wheel nuts slightly.
3. Elevate the side of the vehicle by placing a suitable stand under the frame.
4. Remove the wheel nuts and washers. Remove the wheel.
Wheel Installation
1. Set the park brake. Place the wheel in the correct position on the wheel hub. Be sure the valve
stem is toward the outside and rotation arrows on the tire point toward forward rotation.
WARNING! Improperly installed wheels can adversely affect tire wear and vehicle handling, which
can result in serious injury or death. Always ensure that all nuts are torqued to specification. Do not
service axle nuts that have a cotter pin installed. See your HSUN dealer.
2. Attach the wheel nuts and washers and finger tighten.
3. Carefully lower the vehicle to the ground.
4. Torque the wheel nuts to specification. See page 58.