Hiss HCB2-A, Руководство пользователя

Страница: 5 / 10

04
Step 5：Add fingerprint
① Select the device which you added to enter its
control page；
② Click“Setting”on the left to enter the setting page;
③ Select “Fingerprint management”, and click “add
Fingerprint X”(X is a number of range 1-4) or “Threated
fingerprint” .
Note： Add fingerprint authentication process requires
you to put on your fingerprint twice on the sensor.
7%
Please keep the following state
The device is connected to the power supply
and the red LED flicker.
WiFi signal is good,and the password entered is correct.
Binding device
Exit
Finished
Name
Please input the device name
Control password
Please enter control password
Group Please set groups
Users
Setting Use log
Alarm log
Remote open
Electric Network
4G
Door normal
Command sent successfully
Fingerprint success first
Fingerprint success second
Succeed
A001cabinet
Network
4G
Electric
Door normal Isolation
locked
Note: there is a short delay in
adding fingerprints.Please wait for a second.
Please put your finger on the fingerprint, when hear the beeping sound,
and the light turns green. Remove your finger and put the same finger on the fingerprint again.
After hearing the three beeping sound, remove your finger.
Fingerprint list（2/3）
Fingerprint 1
Fingerprint 2
Add fingerprints 3