18
refrigerator. The water supply to this
refrigerator must only be installed by a
suitably qualified person.
To operate the ice maker properly, water
Going on vacation
If you have a long vacation or business trip
and won’t use the water or ice dispensers
for a long time:
1. Close the water valve. Otherwise, water
leakage may occur.
2. Remove all food.
3. Unplug the refrigerator.
4. Wipe excess moisture from inside and
leave the doors open .Otherwise, odor and
mold may develop.
Warning!
Do not put your fingers, hands or any
other unsuitable objects in the chute or
ice-maker bucket. It may result in personal
injury or material damage.
Never put your fingers or any other
objects in the dispenser opening. It may
cause injury.
Do not try to disassemble the ice maker.
Do not wash or spray the ice bucket with
water while it is in the refrigerator. Remove
it to clean it.
Water clouding phenomenon
All water provided to the refrigerator flows
through the filter which is an alkaline water
filter. In the filtering process, the pressure
of the water that has flowed out of the filter
is increased, and the water becomes
saturated with oxygen and nitrogen. When
this water flows out into the air, the
pressure plummets and the oxygen and
nitrogen get supersaturated, which results
in gas bubbles. The water may temporarily
look misty or cloudy due to these oxygen
bubbles. After a few seconds, the water
will look clear.
Cleaning
After
using
for
a
period,
water
accumulated in receiving tank might
overflow, thus you should clean it with dry
towel regularly to avoid water spilling out
onto the floor.
Note:
In case of stained by dust or other
pollutant,
dispensing
water
with
unpleasant smell,
etc
., water dispenser
parts should be cleaned thoroughly.
3. Changing the water filter
To drink the freshest and cleanest water
from your refrigerator, change the filter on
time.
To change the water filter, follow these
steps:
1. Shut off the water supply. Then turn out
the water filter (A) about 1/4 turn,
counter-clockwise.
2. Pull the water filter (A) from the filter
holder (B).
Note:
To change the water filter more easily,
shut off the water supply valve.
Sometimes, it is hard to disassemble the
water filter because impurities in the water
cause it to stick. If you are having
difficulties, grip the water filter firmly and
pressure of 207-862 kPa is required.
