23
(1) Control Display
Problem
Possible cause
Solution
The display goes
blank.
1.A fuse in your
home may be
blown or the
circuit breaker
tripped.
2.KSD sudden
jump thermostat
is overheated and
needs to be reset
manually.
Replace the fuse or
reset the circuit
breaker.
The display
flashes.
There was a
power failure.
Reset the clock.
(2) Cook top
Problem
Possible cause
Solution
The surface
units will not
maintain a
rolling boil or
will not cook
fast enough.
You may be
using
inappropriate
cookware.
Use pans which
are flat and
match the
diameter of the
surface unit
selected.
The surface units
will not maintain
a rolling boil or
will not cook fast
enough.
In some
areas,the power
(voltage)may be
low.
Cover the pan with
a lid until the
desired chest is
obtained.
The surface units
will not turn on.
A fuse in your
home may be
blown or the
circuit breaker
tripped.
Replace the fuse
or reset the circuit
breaker.
The cooktop
controls are set
improperly
Check if the
correct control is
set for the surface
unit you are using
The surface
units will not
turn on.
Food spillover
was not
cleaned.
Refer to the
section on the care
and cleaning of
the glass cook top
on page 21.
The surface is
hot and the
model features
a light-colored
cook top.
This is normal. The
surface may
appear discolored
when it is hot. This
is temporary and
will disappear as
the glass cools.
The surface unit
frequently cycles
on and off.
Scratches or
abrasions on
the cook top
surface.
Scratches or
abrasions on the
cook top surface.
The surface unit
stops glowing
when changed to
a lower setting.
This is normal.The unit is still on and
hot.
Scratches or
abrasions on the
cook top surface.
The cook top is
being cleaned
improperly.
Scratches are
not removable.
Tiny scratches
will become
less visible in
time as a result
of cleaning.
Use ceramic
glass top
cleaning cream.
Do not use
chemical or
corrosive
agents. These
agents may
damage the
surface of the
product.
Cookware with
rough bottoms
was used on the
cook top or there
were coarse
particles (eg. salt
or sand) present
between the
cookware and the
surface of the cook
top. Cookware has
been slid across
the cook top
surface.
To avoid
scratches,
follow the
recommended
cleaning
procedures.
Make sure
cookware
bottoms are
clean before
use, and use
cookware with
Smooth
bottoms.