- 29 -
Table 3.6 Set subnet mask with key (continue)
3
·As above.
4
·As above.
5
·Finally press select key (SW7) to confirm, after setting, press Eject/Switch key
(SW6) to exit.
·The display content will automatically disappear if no further action within 30 s.
3.1.8 Gateway IP Setting
Refer to the login interface in Figure 3.3 and enter, click <Network Setting> and enter IP setting interface. Can set subnet
mask directly < Default Gateway>.
You can also spot check and set gateway IP address through key + digital tube. Press hold SW6+SW7 key at the same time
for 3s and enter the setting mode, as shown in below Table 3.7.
Table 3.7 Set gateway IP address with key
NO.
·Press Up (SW5) or Down (SW8) until it displays “dG.”.
·In “dG.” Menu, press Select key (SW7) and confirm to enter gateway IP setting
mode.
·After set, press Eject/Switch (SW6) key to exit.
·Press SW7 so that the gateway IP number becomes editable, flashing in 1Hz.
1
·In menu, press Select key (SW7) so that the default number flashes and becomes
editable.
·Press Eject/Switch key (SW6) to switch flashing, and change editable area.
·Press Up (SW5) or Down (SW8) to change the number.
2
·As above.
4
·As above.
5
·As above.
6
·Finally press Select key (SW7) to confirm, after setting, press Eject/Switch key
(SW6) to exit.
·The display content will automatically disappear if no further action within 30s.
3 Configuration of Modbus Adapter