background image

2

The installation, maintenance, movement and 
ancillary work of the product must be entrusted 
to the service department of our company or a 
service provider with installation and formal 
maintenance qualifications. Otherwise, our 
company will not bear any responsibility for all 
consequences arising therefrom.

Repair, disassembly and modification are not 

allowed for non-repair technicians.

Otherwise it may cause a fire or fault.

It is a must to use special gas metal hoses 

or gas hoses.

Do not place or use aerosol cans around 

the stove.

The pressure of the aerosol cans may rise when 
heated, which may cause an explosion or fire.

Do not place flammable and explosive 
materials (clothes, newspapers, kerosene, 
etc.) around the stove.

Otherwise it may cause a 
fire.

Do not use flammable and explosive 
materials such as kerosene, gasoline and 
volatile oil around the stove.

Otherwise it may cause a fire.

The stove will heat up during use. Please do 
not touch the heating unit, and do not place 
metal objects such as knives, forks or spoons 
on the stove.

There must be a free space more than 400mm 
high at the bottom of the stove, which should 
be open to the lower cabinet. It must not be 
sealed, and gaps must be reserved (the lower 
part of the cabinet door should be provided with 
ventilation holes or shutters with a ventilation 
area of not less than 0.02m

2

  ).

Gas cylinders should not be placed directly 
under the stove, and the gas hose should 
not exceed 2m in length.

Before use, check whether the burner cap 
is put in place and the pot holder is 
balanced.

During use or just after the stove is turned off, 

do not touch them with hands since the stove, 
pot holder and tray will still be very hot.
When unattended, please keep children away 
from using or getting close to the burning gas 
stove, so as to avoid scalds.

There must be a certain distance between 
the stove and surrounding objects (the 
distance should be greater than 150mm, and 
the upper space should be greater than 1m. If 
a range hood is installed, the upper height 
should be determined according to the range 

hood requirements).

The distance between the stove and the gas 
cylinder should be kept at least 1m, and the hose 
should not contact with other parts of the stove.

When using the stove, keep a good ventilation 
condition in the kitchen, but prevent strong 
wind from blowing the stove directly.

After using, please turn the knob to the “off” 
position, and turn off the master gas supply 
switch. Be sure to turn off the master gas 
supply switch before going out or going to 
bed.

Suggestion

Caution

For hob that use gas hoses for connection, frequently check the hoses for aging and cracking. It is  

 to replace the gas inlet hoses every two years.

Содержание GG722B













Отзывы: