Hisense GG722B, Руководство пользователя и инструкция по установке

Страница: 11 / 12

8
Common Faults and Solutions
Fault Cause Solutions
The hob cannot
be ignited
The flame is not
persistent, or flameout
Gas leak (or smell)
The master gas switch is not
turned on
Turn on the master gas switch
The hose is twisted, squashed
or blocked
Out of gas
Gas mixed in the hose
The position of the ignition
needle is improper
The spark is weak when igniting
No battery, reverse battery,
dead or undercharged battery
The pulse igniter is broken
The thermocouple is inclined,
dirty or damaged
The solenoid valve is broken
The valve body is broken
Floating flame at thermocouple
The hose is aging, broken or
falling off
The main flame of the burner is
not ignited
The valve body is not tightly
sealed
Aging of valve body sealing ring
Abnormal flame
Irregular flame
The flame is short
and weak
The flame is easy
to be blown off
The flame is long
and yellow (or
with black smoke)
Uneven flame
The burner cap is not placed in
position
The gas pressure is insufficient
The gas inlet of the damper is
too large
The gas inlet of the damper is
too small
The fire hole of the burner cap is
blocked
Correct or replace the intake hose
Replace the gas cylinder or query
Repeat the ignition process to
exhaust the air
Adjust the discharge distance to
3-4mm
Clean the ignition needle
Correctly install the batteries or
replace with new batteries
Replace the pulse igniter
Adjust the position and clean or
replace the thermocouple
Replace the solenoid valve
Replace the valve body
Adjust the damper
Replace or reconnect the hose
Re-ignite after the gas is exhausted
Replace the valve body
Replace the sealing rubber ring
Put the burner cap in position
Check the gas circuit of the cylinder
or the pressure reducing valve
Adjust the damper to make the gas
inlet smaller
Adjust the damper to make the gas
inlet larger
Clean the fire hole of the burner cap
Note: The faults marked with “ ” can be solved by the users themselves. The faults marked
with “ ” must be repaired by professionals. If the fault cannot be eliminated according to
the above solutions, please immediately contact the maintenance department or service
network of our company.