14
Using your appliance
Accessories 1)
Movable sheIves/trays
●
Various glass,plastic storage shelves or
wire trays are incIuded with your
appIiance-different models have different
combinations and different models have
different features.
●
The walls of the refrigerator are
equipped with a series of runners so that
the shelves can be positioned as desired.
Remove and install the door shelf
Warning:The door shelf must not
removed and installed by the user!lf the
door shelf is damaged,contact the
customer helpline for assistance. To
replace the door shelf, the below steps
can be followed:
Press the right side of the door shelf
inwardly,while holding the left side.
When the notch of the shelf has been
detachesd from the refrigerator door,
remove the rack obliquely upwardly.
Firstly tilt the left side of the door
shelf,and make sure the notch has
been fastened to the door. Then
press the right side inwardly,push
it down to the right place.
Remove the door shelf
instalI the door shelf
Control panel
Use your appliance according to the
following control regulations,your
appliance has the corresponding
functions as the control panels showed
in the pictures below.
Temperature regulator in refrigerator
chamber
1.Insufficient refrigeration in chamber.
set the temperature controller at “colder”.
2.Using the refrigerator in normal.
Set the temperature controller at “Mid”.
Important!
High ambient temperatures
(e.g. on hot summer days) and a colder
setting can cause the compressor to run
continuously or even non-stop!
So we do not advise the user set the
temperature control knob at“colder” or
“cold” in normal.
Reason
:when the ambient temperature
is high,the compressor must run
continuously to maintain the low
temperature in the appliance.
