10
Reversing
the
door
The side at which the door opens
can be changed, from the right side
(as supplied) to the left side, if the
installation site requires.
Warning!
When reversing the
door, the appliance must not be
connected to the mains. Ensure
that the plug is removed from the
mains socket.
Tools you will need
Not provided
8mm socket wrench
Thin-blade
screwdriver
Putty knife
8mm wrench
Monkey wrench
Cross-shaped
screwdriver
Additional parts(in the plastic bag)
Left
Hinge Cover
Note:
If required you may lay the
refrigerator on its back in order to gain
access to the base,you should rest it
on soft foam packaging or similar
material to avoid damaging the
backboard of the refrigerator.To reverse
the door,the foIlowing steps are
generally recommended.
1.Stand the refrigerator upright.Open
the upper door to take out alI door
sheIves (to avoid damage)and then
close the door.
2.Use a putty knife or thin-blade
screwdriver to prize the screw hole
cover which is at the top Ieft corner of
the refrigerator and the upper hinge
cover which is at the top right corner of
the refrigerator.
3.Unscrew the special flange self-
tapping screws which are used for fixing
the right upper hinge part by a 8mm
socket wrench or a spanner(please
support the upper door with your hand
when doing it).
4.Remove the upper hinge axis,transfer
it to reversed side and tighten
securely,then put it in a safe place.
remove door shelf
