Hisense 100L5F, Быстрый старт

Страница: 15 / 26

13
clockwise.
If the top of the image is narrower than the screen, then use
the wrench to rotate the left- and right-back feet of the Laser
Cinema clockwise, until the left and right borders of the image
are parallel with the screen borders. Next, move the projector
further from the screen to fill the image to screen width. If the
Do not look directly at the lens when this device is on because the laser light may damage your eyes!
Rotate the back feet clockwise Rotate the center-front foot
counterclockwise
back feet are already at their maximum height, rotate the the
center-front foot counterclockwise.
After you've completed adjusting the image position, rotate the
left and right front feet to the same height as the center one to
make sure the Laser Cinema sits stable.