Hisense 100L5F, Быстрый старт

Страница: 13 / 26

11
ADJUST THE UPPER-RIGHT CORNER OF THE IMAGE
1. If the top of the image is lower on the left and higher on
the right, then use the wrench to rotate the back-right foot
clockwise so that the bottom of the image is also higher
on the right. The upper-right corner will expand further by
default. Make sure part of the image is displayed beyond the
upper-right corner of the screen.
2. Now, rotate the Laser Cinema counterclockwise so that the
bottom of the image is parallel with the screen.
• If the bottom of the image is wider than the screen, then
move the Laser Cinema closer to the screen.
If the bottom of the image is narrower than the screen, then
move the Laser Cinema farther from the screen.
NOTE: Make sure the bottom of the image always stays parallel
with the screen. If not, rotate the Laser Cinema following
previous instructions.
back-right foot