Installation Instructions
8
ML23B User Manual, October 2015
Video Connection
The HIS-ML23 supports digital video through its DVI port, and analog video through its VGA port.
After selecting the appropriate interface, connect one end of your video cable to the input port on
the rear of the monitor and the other end to the appropriate port on your host computer or other
video source�
TIP!
If the video source has an HDMI or DisplayPort connection, this can be converted
for use with the DVI video port using a simple adapter�
If the video source has a 5 wire analog RGB video output, this can be converted for
use with the VGA video port using a simple adapter�
Contact Hope Industrial Systems for more information�
Power Connection
The HIS-ML23 is available with either AC or DC power input.
AC power input models are powered by 100 to 240 VAC, 1�5/0�75 A, 60/50 Hz� Connect the
AC power cable to the power input port on the rear of the monitor� Connect the other end into a
nearby outlet�
DC power input models are powered by 9�6 to 36�6 VDC, 2�5 to 0�65 A, Class 2 or SELV/LPS� A
power supply is provided for bench testing the monitor. First connect the DC power connector to
the power input port on the rear of the monitor� Then connect the AC end into a nearby outlet�
Install Touch Screen Driver
Applies to touch screen monitors only� Instructions below apply to Windows systems� Both Serial
and USB ports are present on all touch screen monitors, but only one should be used to connect
the touch screen interface to the monitor�
All touch screen monitors are shipped with a CD-ROM that contains documentation and drivers
for all major operating systems. To be sure that you have the most current information, please
check the following Internet address:
http://www�HopeIndustrial�com/Touchscreen_Drivers�htm
