Installation Instructions
ML20C User Manual, 99152B, September 2021
9
Video Connection
The HIS-ML20 supports digital video through its DisplayPort and DVI ports, and analog video
through its VGA port.
After selecting the appropriate interface, connect one end of your video cable to the input port on
the rear of the monitor and the other end to the appropriate port on your host computer or other
video source�
HAZ
LOC
NOTE: If this step is not performed, the product will not comply with Class I,
II, III, Division 2 Hazardous Location requirements.
TIP!
If the video source has an HDMI connection, this can be converted for use with the
DVI video port using a simple adapter�
If the video source has a 5 wire analog RGB video output, this can be converted for
use with the VGA video port using a simple adapter�
Certified adapters are available from Hope Industrial Systems. Contact our sales
team for more information�
Power Connection
The HIS-ML20 is available with either AC or DC power input.
AC power input models are powered by 100 to 240 VAC, 1�5/0�75 A, 60/50 Hz� Connect the
AC power cable to the power input port on the rear of the monitor� Connect the other end into a
nearby outlet�
HAZ
LOC
NOTE: If this step is not performed, the product will not comply with Class I,
II, III, Division 2 Hazardous Location requirements.
