Installation Instructions
8
ML19G User Manual, January 2015
TIP!
If the video source has an HDMI or DisplayPort connection, this can be converted to
DVI with a simple adapter� Contact Hope Industrial Systems for more information�
Power Connection
The HIS-ML19 is available with either AC or DC power input�
AC power input models are powered by 100 to 240 VAC, 1�5/0�75 A, 60/50 Hz� Connect the
AC power cable to the power input port on the rear of the monitor� Connect the other end into a
nearby outlet�
DC power input models are powered by 9�6 to 36�6 VDC, 2�5 to 0�65 A, Class 2 or SELV/LPS� A
power supply is provided for bench testing the monitor� First connect the DC power connector to
the power input port on the rear of the monitor� Then connect the AC end into a nearby outlet�
Install Touch Screen Driver
Applies to touch screen monitors only� Instructions below apply to Windows systems� Both Serial
and USB ports are present on all touch screen monitors, but only one should be used to connect
the touch screen interface to the monitor�
All touch screen monitors are shipped with a CD-ROM that contains documentation and drivers
for all major operating systems� To be sure that you have the most current information, please
check the following Internet address:
http://www�HopeIndustrial�com/Touchscreen_Drivers�htm
IMPORTANT!
If you will be using a USB connection,
install the touch screen driver first,
and then
connect the USB cable� If you will be using a Serial connection,
connect the Serial
cable first,
and then install the touch screen driver�
