Hirschmann MS30, Power MICE, MACH 4000, OCTOPUS, Руководство пользователя

Страница: 139 / 196

Operation Diagnostics
Layer 2 Enhanced with Layer 2 Professional
Release 1.0 10/05
9.1 Sending traps
135
9.1.3 Configuring traps
V
Select the
Diagnostics:Alarms (Traps)
dialog.
This dialog allows you to specify which events trigger an alarm (trap) and
to whom these alarms should be sent.
V
In the “IP Address” column, enter the IP address of a network
management station to which the traps should be sent.
V
In the “Active” column, you mark the entries which should be taken
into account when traps are being sent.
V
In the frame “Selection” select these trap catagories from which you
want to send traps
Note: Access this dialog with read-write password.
Fig. 47: Alarmes dialog