Commissioning
4.3.3 Sensor adjustment, main boom length sensor
Check mounted length- and/or length/angle encoder on the main boom for sufficient pretension and
rope length.
Move crane to 0° working position (boom back), stabilise and align precisely.
Luff boom to a position which permits full extension and retraction.
Preconditions:
Calling up function
from adjustment menu.
1)
Retract main boom fully.
Confirm with
key when completed.
2)
Adjust mechanical zero point on the
length sensor
3)
Extend main boom fully.
Confirm with
key when completed.
Zero point is re-adjusted.
4)
Sensor is now adjusted.
Confirm next with
key.
Adjustment menu appears.
Select next sensor for adjustment as required.
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com
28
/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.
