Commissioning
4.3.2 Zero point adjustment, slewing angle sensor
Move crane to 0° working position (boom back), stabilise and align precisely.
Luff boom to a position which permits slewing to the working position.
Preconditions:
Calling up function
from adjustment menu.
1)
Slew main boom to the precise mechanical 0°
position and luff to a position which permits slewing
to the working position.
Confirm with
key when completed.
Zero point is re-adjusted.
2)
Angle direction is checked. To do this:
Rotate main boom to the right by at least 5°.
Confirm with
key when completed.
3)
Sensor and angle direction are now adjusted.
Confirm next with
key.
Adjustment menu appears.
Select next sensor for adjustment as required.
© 2012 Hirschmann Automation and Control GmbH · Mobile Machine Control Solutions · www.hirschmann.com
27
/59
50-700-19-2001_422175_en (Manitex)_Rev_B.doc / 2012-03-13 / Issue B / rk.
