Hirschmann MACH4000 Series, Руководство пользователя

Страница: 34 / 68

34
Installation MACH4000
Release 14 06/2013
1.10.2 Port status display
Every media module has one LED per port. The meaning of this port status
LED depends on the setting on the basic device. You define the display
meaning with the “SELECT” button on the basic device.

Press the button for approx. 2 seconds to change the meaning
of the display. If the button is not pressed for approx. 20 seconds, the
display status changes back to “L/D”.
LED Display Color Activity Meaning
RL2 Signal
contact
(Relay 2) Red Lights up Signal contact 2 is open; it is reporting an
error.
Yellow Lights up Signal contact 2 is open.
The “Manual setting” is active.
None Signal contact 2 is closed, it is not reporting
an error, or it was closed via the “Manual
setting”.
LED Display Color Activity Meaning
FAN Fan Green Lights up The plug-in fan unit is installed, and no fan is
reporting an error.
None The plug-in fan unit is installed and at least
one fan is reporting an error, or the plug-in
fan unit is not installed.
LED Display Color Activity Meaning
RUN BOOT/ RUN Green Lights up The system is operational.
Green Lights up The system is booting.
None The system is in reset mode.
LED Display Color Activity Meaning
L/D Link status Green Lights up The port LEDs of the media modules display
the connection status.
LED Display Color Activity Meaning
FDX Full duplex/
half duplex Green Lights up The port LEDs of the media modules display
the half-duplex or full-duplex connection
status.
LED Display Color Activity Meaning
1000 10/100/1000
Mbit/s Green Lights up The port LEDs of the media modules display
the set transmission speed.
LED Display Color Activity Meaning
ON Auto-
negotiation Green Lights up The port LEDs of the media modules display
the port configuration type.
LED Display Color Activity Meaning
RING
PORT Ring port Green Lights up The port LEDs of the media modules display
the HIPER-Ring assignment.
LED Display Color Activity Meaning
STBY Stand-by Green Lights up The port LEDs of the media modules display
the assignment to a redundant coupling of
network segments.